fixed the whole servo adsorption glazing dry die cutting machine

LH 固定式全伺服全程吸附上光烘干模切机
fixed the whole servo adsorption glazing dry die cutting machine

LH 固定式全伺服全程吸附上光烘干模切机

fixed the whole servo adsorption glazing dry die cutting machine

用途与特点：

品质

◆源于对机械品质的高度要求，JK 系列水性印刷机的设计、原材料选型、加工、装配、工业化操控等均超过行业标准。利用全新设计、品质管理系统，全面追踪到每一个细节，交付给客户无论在硬件和软件上都是一台高品质的设备。

稳定

◆前缘送纸、私服相位、全程真空吸附传送，多排轴错位吸附传送设计更利于纸板稳定输送；加强型框架定位装置，齿轮直接刚性连接与墙板，纯进口的台湾齿轮和轴承带来高速稳定性，配合整体式网辊提升板保证印刷长期稳定。整机采用法国施耐德电器，主机、风机、PLC 触摸屏采用德国西门子。

精度

◆胶辊表面双层覆胶技术，低压力输送免除气动压力的冲击；可多段控制全程真空吸附，配合呈品字错位加密陶瓷轮阵列，纸板多点吸附；无跳动整体精密的网辊传动装置，全高速时保证减少网辊抖动， 配合伺服相位调整提高网点印刷品质；下调式模切辊压力，始终保持纸板一条线输送带来精度保证。

效率

◆专利型送纸宽幅自动调整装置和带卡位的印版锁紧装置，配合工业化 4.0 的工控设计，无论在硬件和软件均是操作者高效率的工具。送纸- 除尘- 印刷- 预烘干- 独立烘干- 上光- 独立烘干- 模切- 清废 - 堆码 - 计数 - 打包，一条线自动化生产作业。

环保

◆工业 4.0 配合全变频计数，红外烘干变段可调技术可大量节省能耗。

服务

◆基于行业首用的 PDM 设计档案管理系统，完整的技术支持档案无论时间再久远仍可对客户做出可靠的承诺，持续为客户高效的售后服务支持。

Use and Characteristics:

Quality: Due to high requirements for mechanical quality, raw materials selection, processing, assembly of industrial control over the industry standard, using the new design, quality management system, comprehensive tracking to every detail, delivery to the customer in both hardware and software are a high quality equipment.

Stable: The lead feeder, servo phase, vacuum adsorption, many rows dislocation arrangement design, favors the cardboard stable transmission. Reinforced frame positioning device, gear direct rigid connection in the wallboard, imported gear from Taiwan and bearing from japan with high speed and long-term stability, with integral anilox roller lift version to keep promotion assure printing, the whole machine adopts the French Schneider electric, host, fan, PLC, touch screen use GERMAN SIEMENS.

Precision: Rubber roller surface with double glue technology, low pressure transmission from the impact of the pneumatic pressure, can control the whole vacuum adsorption, more with a word dislocation encryption round ceramic array, cardboard more adsorption, without beating, the overall precision of the anilox roller transmission device, full speed to reduce anilox roller beating, with servo phase adjustment increase anilox roller printing quality, down adjustment pressure structure  of the die cutting roller keep paperboard line transmission precision guarantee.

Efficiency: Patent type feeding width automatic adjustment device and printing locking device with screw. With 4.0 engineering design of industrialization, both hardware and software are charged with the author’s high efficiency tools. Feeding – dust removing – printing

–pre drying- coating- drying-slotting- die cutting-gluer line- case maker

Service:  Based  on  the  industry’s  first  use  of   PDM  design  file management system, complete technical support files, regardless of the long time can still be credible commitment to customers, continuous and efficient after-service for the customer support.

This machine also with long-range control with internet. We can monitoring the machine and do service in China office.

输送部 

◆前缘送纸为压 轴式四轴前缘送纸，7.5kw 风机收风辅助送纸，可根据纸板弯曲不同，调整风量，确保送纸顺畅。

◆主控面板由控制按钮和电脑触摸屏控制操作，方便可靠。

◆可连续或隔张送纸 ( 有计数器 )( 可根据需要选择或隔张送纸 )。

◆左右挡板位置采用机械电动控制，由标尺显示移动距离。

◆7.5kw 风机，吸风辅助送纸，变频器调整风量，可根据纸板弯曲不同，做风量调整，确保送纸顺畅。

◆除尘装置，毛刷及风机清除纸板表面纸屑。

◆两辊传动采用十字滑块联轴器传动，减少磨损使传动更平稳。

◆机台离合采用电动控制机台离合，并附警灯行进间连续报警警示，确保作业人员安全。

◆传动轴附磨擦式离合器，避免误动作或过载时保护电机不致烧毁。

◆送纸部、印刷部、开槽部 . 模切部电动式自动归零。

◆气压式锁轴装置。

FREE

◆While the leading edge feeding is a pressure-shaft four-axis feed, the 7.5kw fan air receiving auxiliary feeding can adjust the air volume according to the different bending of the cardboard to ensure smooth feeding.

◆The main control panel is operated by control buttons and computer touch screen, which is convenient and reliable.

◆Stirrup can be continuous or a separate feed (with counter)(optional or separate feed as required).

◆The position of the left and right baffle is controlled mechanically and the moving distance is displayed by the ruler.

◆With 5.5kw fan, air suction auxiliary paper feeding, frequency converter can adjust the air volume according to the different bending of the cardboard, so as to ensure smooth paper feeding.

◆Cleaning device, brush and fan to remove the paper scraps on the cardboard surface.

◆The two - roller drive adopts cross slide coupling to reduce wear and make the drive more stable.

◆Electric control is used to control the disconnection of the mobile station, and the continuous alarm warning is attached to the moving lamp to ensure the safety of operators.

◆The transmission shaft is attached with an electromagnetic friction clutch to prevent the motor from burning up in case of misoperation or overload.

◆The paper feeding department, printing department, die-cutting department of the electric automatic return to zero.

◆Air pressure type interlock.

开槽部 Slotted

刀模辊（下辊）：

◆铸钢材料，表面精磨、镀硬络。

◆平衡校正，增加运转稳定性。

◆适用刀模高度25.4mm。木模板厚度16-18mm( 三层板用) 13-15mm( 五层板用) 胶垫辊 ( 上辊 )：

◆平衡校正，增加运转稳定性

◆手动调整与刀模间隙。

◆机械式横向 40mm，游动装置相位调整机构：

◆行星式齿轮式结构，同印刷部。

Die roll (lower roll) :

◆Cast steel materials, surface grinding, hard coating.

◆To balance correction to increase stability of operation.

◆Applicable knife mold height is 25.4mm. Thickness of wood template: 16-18mm(for three- layer plates); 13-15mm(for five-layer plates)

Cots (upper roller) :

◆To balance correction to increase stability of operation

◆To manually adjust the gap with the tool die.

◆Mechanical transverse 40mm, phase adjustment mechanism of the moving device:

Planetary gear type structure, with the printing department.

印刷部 Print

◆印刷辊采用优 质厚壁无缝钢管，表面精磨镀硬络。

◆平衡校正，运转平稳。

◆卷轴挂版，单边锁紧，使挂版位置准确、方便、快捷。

◆全版挂板沟，适用 10mm 挂版条。

2、压印辊

◆厚壁无缝钢管，表面精磨，镀硬络。

◆平衡校正，运转平稳。

◆压辊调整间隙采和自锁结构，调整范围 0-11mm。

3、传墨网纹辊

◆厚壁无缝钢管表面精磨后再进行表面研磨，压制网纹，镀硬铬。

◆胶辊与网纹辊转动时能够形成速差，让胶辊起到刮墨作用。

◆配合送纸系统气压式自动升降装置 ( 印刷时网辊下降与印刷版接触， 停止印刷时，网纹辊上升与印版分离）。

◆网纹辊间隙采用自锁结构，调整范围 0-11mm。

4、匀墨橡胶辊

◆优 质无缝钢管包裹耐用，耐腐蚀、耐磨橡胶。

5、相位调整机构

◆行星式齿轮构造。

◆印刷相位采用电脑及电动数字控制 360 度调整( 运转、停止均可调整）。

◆横向相位采用电动机械调整，控制范围 ±10 mm。

6、水墨循环结构

◆气压式隔膜泵，供墨稳定，操作保养简单。

◆油墨滤网，过滤杂质。

7、印刷相位固定装置

◆电磁离合器制动式刹车机构，当单元分离调整相位时，刹车机构限制齿轮转动，保持原有齿位置固定点。

◆压印辊的动力传动采用十字滑块式传动，减少磨损传动更平稳。

◆The printing roller USES high quality thick - walled seamless steel pipe, surface fine grinding and hard.

, balance correction, smooth operation.

◆To scroll up version, single side lock, so that hanging version position accurate, convenient, fast.

◆To the full version of the plate trench, applicable to 10mm hanging plate bar.

2.Stamping roller

◆Thick - walled seamless steel pipe, surface grinding, hard - coated., balance correction, smooth operation.

3.Ink roller

◆Is thick - walled seamless steel tube surface fine grinding after surface grinding, pressing mesh, hard chrome plating.

◆The roller can form a speed difference when rotating with the roller, so that the roller can play the role of scraping.

◆Working with the air pressure automatic lifting device of the paper feeding system (when the screen roller drops in contact with the printing plate, when the printing stops, the screen roller rises and separates from the printing plate).

◆The gap between the roller is self-locking, with adjustment range of 0-11mm.

4.Ink roller

◆Is high quality seamless steel tube wrap durability, corrosion - resistant, wear - resistant rubber.

5.Phase adjustment mechanism

◆Planetary gear structure.

◆The print phase USES computer and electric digital control for 360-degree adjustment (up and down).

◆The transverse phase is adjusted by electromechanical. The control range is + / - 10 mm.

6.Ink circulation structure

◆Air pressure diaphragm pump, stable ink supply, simple operation and maintenance.

◆Ink screen, filter impurities.

7.Printing phase fixation device

◆The electromagnetic clutch brake brake mechanism, when the unit is separated to adjust the phase, the brake mechanism limits the rotation ofthe gear and maintains the fixed point of the original tooth position.

◆The power drive of the roller adopts the cross slide drive, which can reduce wear and make the drive more stable.

模切部 Die cut

◆开槽十轴设计，预压压线开槽

◆预压压线结构紧凑设计，轮轴直径加大，刚性好

◆双滚珠丝杆横向调整结构，对刀准确，移动稳定

◆刀座横移精密电机控制，移刀精度高定位速度快

◆刀座横移石墨铜片横移，耐磨损维护方便

◆弹性角刀结构，三至五层无需调整

◆可选配打手提孔模座，可选八轴设计

◆预压一压线一二次压线一开槽

◆Eight - axis slotting design, prepress line slotting

◆Compact design of precompression line, increased diameter of wheel shaft, good rigidity

◆Double ball screw transversely adjusted structure, accurate to the cutter, stable movement

◆The machine is controlled by horizontal motion servo motor with high precision and fast positioning speed

◆It is easy to maintain wear resistance by moving graphite copper sheet across the cutter

◆Elastic Angle knife structure, three to five without adjustment

◆Optional punching die holder, optional 8-axis design

◆Prepress one pressure line one second pressure line one slot